THE MAIL ORDER 4X4 SEPTEMBER SALE!
Start Autumn with a bang with some of our SEPTEMBER SALE BARGAINS!
FREE DELIVERY ON ALL ORDERS OVER £50.00 (Restrictions apply).
|
 |
Special Offers on GENUINE OEM Landrover Dog Guards & Lamp Guards
Special deals on GENUINE OEM Landrover dog guards & lamp guards for the Defender, Discovery 1, Discovery 2, Range Rover P38 and the Freelander 1.
|
|
Pair of GENUINE Landrover Front lamp guards to suit Range Rover P38. High density plastic slatted lamp guards as fitted by Landrover to Range Rover P38's. Comes complete with a full fitting kit.
Landrover price..........................................................138.00
CLICK HERE FOR A LARGER IMAGE
|
|
Pair of GENUINE Landrover rear lamp guards to suit Range Rover P38. High density plastic slatted lamp guards as fitted by Landrover to Range Rover P38's. Comes complete with a full fitting kit.
Landrover price..........................................................£111.00
CLICK HERE FOR A LARGER IMAGE
|
|
Pair of GENUINE Landrover front lamp guards to suit Discovery 2. High density plastic slatted lamp guards as fitted by Landrover to Discovery 2 from the face lift in 2003. Comes complete with a full fitting kit.
Landrover price..........................................................£80.00
CLICK HERE FOR A LARGER IMAGE
|
|
Pair of GENUINE Landrover rear upper lamp guards to suit Discovery 2. High density plastic slatted lamp guards as fitted by Landrover to Discovery 2 from the face lift in 2003. Comes complete with a full fitting kit. Can also be used on earlier vehicles if you just want the upper rear lamp guards.
Landrover price..........................................................£43.40
CLICK HERE FOR A LARGER IMAGE
|
|
Pair of GENUINE Landrover rear lower bumper lamp guards to suit Discovery 2. High density plastic slatted lamp guards as fitted by Landrover to Discovery 2 from the face lift in 2003. Comes complete with a full fitting kit. Can also be used on earlier vehicles if you just want the lower bumper lamp guards.
Landrover price..........................................................£37.44
CLICK HERE FOR A LARGER IMAGE
|
|
Pair of GENUINE Landrover front lamp guards to suit Discovery 2. High density plastic slatted lamp guards as fitted by Landrover to Discovery 2 up to the face lift in 2003. Comes complete with a full fitting kit.
Landrover price..........................................................£92.76
CLICK HERE FOR A LARGER IMAGE
|
|
Set of four GENUINE Landrover rear lamp guards to suit Discovery 2. High density plastic slatted lamp guards as fitted by Landrover to Discovery 2 up to the face lift in 2003. Comes complete with a full fitting kit. To order either the upper or lower guards as pairs click on the links below.
Landrover price..........................................................£92.76
CLICK HERE FOR A LARGER IMAGE
Related products:
|
|
Original Equipment Rear Lamp Guards to suit all Freelanders from 2004 onward. Made from high density plastic; these are the guards supplied by Landrover and come with all fittings needed. (Sold in sets of 4).
Landrover price..........................................................£55.31
CLICK HERE FOR A LARGER IMAGE
|
|
Original Equipment Headlamp Guards to suit all Freelanders from 2004 onward. Made from high density plastic; these are the guards supplied by Landrover and come with all fittings needed. (Sold in pairs).
Landrover price..........................................................80.00
CLICK HERE FOR A LARGER IMAGE
|
|
Original Equipment Rear Lamp Guards to suit all Freelanders up to 2004. Made from high density plastic; these are the guards supplied by Landrover and come with all fittings needed. (Sold in sets of 4).
Landrover price..........................................................£74.04
CLICK HERE FOR A LARGER IMAGE
|
|
Original Equipment Rear Lamp Guards to suit all Freelanders up to 2004. Made from high density plastic; these are the guards supplied by Landrover and come with all fittings needed. (Sold in sets of 4).
Landrover price..........................................................£74.04
CLICK HERE FOR A LARGER IMAGE
|
|
GENUINE Land Rover Defender 90/110 hard top dog guard. Fits to the top of the second bulkhead behind the first row of seats, reaches from hte top of the bulkhead to the roof. Made from square section steel tube and heavy steel wire mesh. Treated with a grey rust resistant finish, easy to remove but when in place keeps your cargo (or your livestock!) where it belongs.
Land Rover Retail Price.....................................................£134.00
CLICK HERE FOR A LARGER IMAGE
|
|
GENUINE Land Rover dog guard to fit Defender 110 Station Wagon only. Sturdily made from square section steel tube frame and steel mesh, coated in a grey rust resistant finish. Easily removable, this guard keeps your cargo, (or your livestock!) where they should be, fits behind the second row of seats from floor to roof.
Land Rover Retail Price........................................£182.00
CLICK HERE FOR A LARGER IMAGE
|
|
Genuine Land Rover Discovery 1 mesh dog guard. Easy to fit and remove; coated steel mesh in a tubular section frame.
Landrover Price.....................................................£117.00
CLICK HERE FOR A LARGER IMAGE
|
|
Genuine Land Rover Discovery 2 mesh dog guard. Easy to fit and remove; coated steel mesh in a tubular section frame. Fits Discovery 2 '99 to '05.
Landrover Price..................................£113.00
CLICK HERE FOR A LARGER IMAGE
|
|
Genuine Land Rover Discovery 2 bar type dog guard. Easy to fit and remove; coated steel bars in a tubular section frame. Fits Discovery 2 '99 to '05.
Landrover Price..................................£132.00
CLICK HERE FOR A LARGER IMAGE
|
|
GENUINE Land Rover Range Rover P38 bar type dog guard. Made from square section stee tube and bar, finished in a grey rust resistant coating. Easy to remove for access, this guard keeps your cargo (or your livestock!), safley where it should be.
Land Rover Retail Price..................................................£174.00
CLICK HERE FOR A LARGER IMAGE
|
|
Genuine Landrover Freelander dog guard. The upper section is made from coated steel bars, the lower section (behind the seat backs) is coated steel mesh.
Landrover Price....................................£122.00
CLICK HERE FOR A LARGER IMAGE
|
|
Set of four parabolic springs to suit SWB Series vehicles. Parabolic springs offer a softer and more compliant ride, as well as giving a lift to the vehicle. You should also see our +2" shocks (BA 2113A & BA2114A).
CLICK HERE FOR A LARGER IMAGE
|
|
Set of four parabolic springs to suit LWB Series vehicles. Parabolic springs offer a softer and more compliant ride, as well as giving a lift to the vehicle. You should also see our +2" shocks (BA 2113A & BA2115A).
CLICK HERE FOR A LARGER IMAGE
|
|
Pair of Parabolic springs to suit the front of a Series vehicle. Parabolic springs offer a softer and more compliant ride, as well as giving a lift to the vehicle. You should also see our +2" shocks (BA 2113A).
CLICK HERE FOR A LARGER IMAGE
Related products:
|
|
Procomp +2" ES3000 gas shocks. To fit the front of a SWB Series. These units are for vehicles that have a +2" lift due to the fitment of our Parabolic Springs (BA2113).
Larger Image
Related products:
|
|
Pair of Parabolic springs to suit the rear of a SWB Series vehicle. Parabolic springs offer a softer and more compliant ride, as well as giving a lift to the vehicle. You should also see our +2" shocks (BA 2114A).
CLICK HERE FOR A LARGER IMAGE
Related products:
|
|
Procomp +2" ES3000 gas shocks for the rear of a SWB Series vehicle. These units are for use on Series vehicles that have been fitted with our paraboilc springs (BA 2114).
Larger Image
Related products:
|
|
Pair of Parabolic springs to suit the rear of a LWB Series vehicle. Parabolic springs offer a softer and more compliant ride, as well as giving a lift to the vehicle. You should also see our +2" shocks (BA 2114A).
CLICK HERE FOR A LARGER IMAGE
Related products:
|
|
Procomp +2" ES3000 gas shocks. To suit the rear of a LWB Series vehicle, these units are for series vehicle s that have been lifted by the fitting of our parabolic springs (BA 2115).
Larger Image
Related products:
|
|
T Max EW9000 recovery winch and a Defender winch mounting plate. One of the T Max family of winches. These winches have quickly built up a reputation for ruggedness, reliability and quality at a very attractive price. This model features a 9000 lbs straight line pull. Comes complete with roller fairlead, remote control (with 3.7m cable) and 28.5m of 8.2mm aircraft grade galvinised wire rope. NB on some set ups you will need to extend the battery cables, see the clickable link below.
CLICK HERE FOR A LARGER IMAGE
Related products:
|
|
T Max EW9500 recovery winch and a Defender winch mounting plate. One of the T Max family of winches. These winches have quickly built up a reputation for ruggedness, reliability and quality at a very attractive price. This model features a 9500 lbs straight line pull. Comes complete with roller fairlead, remote control (with 3.7m cable) and 28.5m of 8.2mm aircraft grade galvinised wire rope. NB on some set ups you will need to extend the battery cables, see the clickable link below.
CLICK HERE FOR A LARGER IMAGE
Related products:
|
|
This is a deep cycle battery which means that it is the ideal second battery in a split charging set up; used to run things like winches; fridges etc; where the battery may be run right down. This degree of discharge can cause damage to normal cranking batteries but the Optima Yellow Top is designed for it. These units also incorperate the spiral gel cell used in the Red Top batteries.
CLICK HERE FOR A LARGER IMAGE
|
|
These fully sealed; batteries use a special spiral of thin lead sheets; rather than the tradtional flat electrodes to increase the elctrode/electrolite interface area by more than 100%. This gives up to three times the life and twice the starting power of a good tradtional battery. The gel electrolite used; and the fully sealed constrution also leads to a very robust and easy to mount battery.
CLICK HERE FOR A LARGER IMAGE
|
|
The exceptional performance of these batteries comes from the use of spiral wound AGM grids, tightly packed in sealed cells. This results in a sealed, maintenance free battery which is easy to charge, and very resistant to deep discharge cycles. This makes it ideal for use in 4x4 vehicles in both starting and winching applications. The MAX900DC Deep Cycle battery has the edge in heavy winching applications due to its extra resistance to heavy discharge cycles that would damage normal batteries. For ease of mounting the batteries feature mounting holes near the center that run top to bottom through the entire case. The MAX900DC also features an extra set of wing nut terminals on the top of the battery.
ALL EXIDE MAAXIMA 900 BATTERIES FEATURE A 2 YEAR WARRENTY
12 Volt
900 Amp
50 Amp/Hour
Dimensions: 260mm Long x 173mm Wide x 205mm High.
CLICK HERE FOR A LARGER IMAGE
|
|
The exceptional performance of these batteries comes from the use of spiral wound AGM grids, tightly packed in sealed cells. This results in a sealed, maintenance free battery which is easy to charge, and very resistant to deep discharge cycles. This makes it ideal for use in 4x4 vehicles in both starting and winching applications (although the MAX900DC Deep Cycle battery has the edge in heavy winching applications). For ease of mounting the batteries feature mounting holes near the center that run top to bottom through the entire case. The MAX900 also features an extra set of terminals on the front of the battery.
ALL EXIDE MAAXIMA 900 BATTERIES FEATURE A 2 YEAR WARRENTY
12 Volt
900 Amp
50 Amp/Hour
Dimensions: 260mm Long x 173mm Wide x 205mm High.
CLICK HERE FOR A LARGER IMAGE
|
|
All you need to split the charge from your engine between the main cranking battery and a second, auxiliary battery (a deep cycle winch battery for example). This kit links both batteries for charging, but automatically isolates them whilst discharging. The display unit features a manual over-ride option. This kit is to suit a 12v charging system and has a 180A load capacity. Kit includes solenoid, display unit, wiring, connectors and full instructions.
CLICK HERE FOR A LARGER IMAGE
|
|
Full set of North American Specification complete with plastic plinths. This set comprises: 4 indicator lamps, 2 front sidelamps and 2 stop/tail lamps. The connections to the rear of the later lamps are via a plug on the loom (plugs not included).
CLICK HERE FOR A LARGER IMAGE
|
|
This set comprises: 4 indicator lamps, 2 front sidelamps and 2 stop/tail lamps. To suit later Defenders '95 to'02 (approx.). The connections to the rear of the later lamps are via a plug on the loom (plugs not included).
CLICK HERE FOR A LARGER IMAGE
|
|
This set comprises: 4 indicator lamps, 2 front sidelamps and 2 stop/tail lamps. To suit early Defenders up to 1995 (approx.) the connections to the lamps are via crimp on bullet terminals.
CLICK HERE FOR A LARGER IMAGE
|
|
|
|
A Pair Heavy Duty Drive Flanges
Price: £25.00 (Excluding VAT at 17.5%)
|
Vehicle model & yearMODEL & YEAR or VIN NO.
|
|
A pair of heavy duty drive flanges for the end of the axles. These flanges are made from tempered steel and are closed with a heavy machined nut instead of a plastic end cap. The units help to overcome the problem of wear and faliure of the splines where the drive shafts enter the end cap. Please select your vehicle model and year form the drop down list.
CLICK HERE FOR A LARGER IMAGE
|
|
One of the most versatile pieces of recovery equipment you can own. These jacks can be used to pull posts and stumps, act as a short pull winch, be used as a spreader or a clamp and of course lift your vehicle. Fantastic value at this price.
CLICK HERE FOR A LARGER IMAGE
|
|
One of the most versatile pieces of recovery equipment you can own. These jacks can be used to pull posts and stumps, act as a short pull winch, be used as a spreader or a clamp and of course lift your vehicle. Fantastic value at this price.
CLICK HERE FOR A LARGER IMAGE
|
|
Bearmach Premier Poly Bush Kit THE BEARMACH POLYBUSHES NOW FEATURE A 3 YEAR/60,000 MILE WARRENTY.
Price: £72.34 (Excluding VAT at 17.5%)
|
Please select your vehicle details.Vehicle model & year.
|
|
These Bearmach Premier poly bushes are easy to fit, offer a stiffer ride, and last longer than the standard rubber and steel bushes. The polyurethane that they are made from is more resistant to shear, compression, chemicals and temperature changes than the rubber used in the standard bushes. This combined with the improvement in handling they give make these an excellent upgrade for any vehicle. (Defender bush set shown). Please select you vehicle model & year from the drop down list.
THE BEARMACH POLYBUSHES NOW FEATURE A 3 YEAR/60,000 MILE WARRENTY.
CLICK HERE FOR A LARGER IMAGE
|
|
|
|
|
|
|
|
|
|
Does everything our single action unit does but QUICKER. Robust; metal construction gives this unit a longevity not found in the cheaper plastic units on the market. Comes with a coiled air line and pressure gauge; all stored in a heavy nylon carry sack.
CLICK HERE FOR A LARGER IMAGE
|
|
Robust, metal construction gives this unit a longevity not found in the cheaper plastic units on the market. Delivers an air flow of 72 litres per min, at up to 150 PSI. Comes with a coiled air line and pressure gauge, all stored in a heavy nylon carry sack.
CLICK HERE FOR A LARGER IMAGE
|
|
Polished aluminium knobs for the gearstick and transfer box of your Defender. Available to suit LT77 gear boxes (reverse top left of the gate), and R380 gear boxes (reverse bottom right of the gate).
Please select your gear box type from the drop down list.
CLICK HERE FOR A LARGER IMAGE
|
|
T Max EW9000 recovery winch. One of the T Max family of winches. These winches have quickly built up a reputation for ruggedness; reliability and quality at a very attractive price; this model features a 9000 lbs straight line pull. Comes complete with roller fairlead; remote control (with 3.7m cable) and 28.5m of 8.2mm aircraft grade galvinised wire rope. NB on some set ups you will need to extend the battery cables.
CLICK HERE FOR A LARGER IMAGE
|
|
T Max winch recovery accessory kit. The kit includes two bow shackles; a tree strop; a snatch block; extra tow hook; Y wrench; a pair of gloves and a heavy nylon holdall. Ideal for the first time winch user, every thing you need to use your winch safley in one compact package.
CLICK HERE FOR A LARGER IMAGE
|
|
GENUINE Landrover lightweight warm climate cap. This is a stylish grey cap with black accent stripes features the Landrover oval embroidered on the peak,and " GO BEYOND" embroidered on the left hand accent stripe in white. Made from a soft light weight polycotton ideal for warm weather wear.
Landrover Price.......................................................................£15.00
CLICK HERE FOR A LARGER IMAGE
|
|
GENUINE Landrover "Classic" cap in soft green brushed cotton. The brim features a reflective silver piped edge, while the crown has the Landrover oval embroidered on the front and "The Landrover Experience" on the rear.
Landrover Price.....................................................£15.00
CLICK HERE FOR A LARGER IMAGE
|
|
TMax EW9500 recovery winch. One of the TMax family of winches. These winches have quickly built up a reputation for ruggedness, reliability and quality at a very attractive price, this model features a 9500 lbs straight line pull. Comes complete with roller fairlead, remote control (with 3.7m cable) and 28.5m of 8.2mm aircraft grade galvinised wire rope. NB on some set ups you will need to extend the battery cables.
CLICK HERE FOR A LARGER IMAGE
|
|
Electrical fan kit. Electrical replacement fan kit, replaces the belt driven unit with a high efficiency electrical unit. Unit includes thermostatic switch and fixing kit. For heavy duty applications simply use two kits.
CLICK HERE FOR A LARGER IMAGE
|
|
Tailored footwell mats made from heavy duty rubber backed with heavy duty sound deadening foam to suit Defender 4cyl up tp 1994, 300Tdi, Td5 and V8. Please select your engine type and vehicle year from the drop down menu.
CLICK HERE FOR A LARGER IMAGE
|
|
This smart, slimline unit allows you to preset the tyre pressure (up to 120PSI) that you require using an easy to read LCD display, then at the press of a button the unit will inflate the tyre and cut off when the selected pressue is reached. The unit plugs into your vehicles 12V accessories socket via a 4m (13') allowing you to easily reach each of your tyres. The unit also features a wide angle LED work light/ breakdown beacon and is packed in a smart black nylon storage case. An ideal Chrismas gift for the motorist.
ADVERTISED IN THE NATIONAL PRESS AT £26.04 PLUS VAT!
CLICK HERE FOR A LARGER IMAGE
|
|
A set of two solid steering arms fitted with 4 Bearmach greasable track rod ends to suit Discovery 1 (fitted with 4 track rod ends) and Roange Rover Classics (fitted with 4 track rod ends).
CLICK HERE FOR A LARGER IMAGE
|
|
Stainless steel bolt on diff guard. This axel diff guard fits straight on all front axelsand most rear axels. Protects the crown wheel/oil pan from impact damage. (Guard illustrated is painted green for clarity only).
CLICK HERE FOR A LARGER IMAGE
|
|
Grab yourself this bargin while you can. This kit comprises of 4 Bearmach Blue Springs, 4 Procomp Gas Shock Absorbers, 2 Turret Rings with Nuts and a Hi Spec Bearmach Polyurethane Bush Kit.
IF YOU WANT A PAIR OF HEAVY DUTY TURRET RINGS WITH STAINLESS STEEL STUDS AND NUTS PLEASE SELECT FROM THE DROP DOWN LIST ABOVE.
CLICK HERE FOR A LARGER IMAGE
|
|
Tailored footwell mats made from heavy duty rubber to suit Discovery 1 (1989-1998). You can also select the matching set of rear footwell mats using the drop down list for only £12.50!
CLICK HERE FOR A LARGER IMAGE
|
|
An authentic looking Series grille; made from high density plastic and given a chrome like finish. Fits straight on in place of the standard grille.
CLICK HERE FOR A LARGER IMAGE
|
|
Heavy, moulded rubber transmission tunnel cover with a foam backing. To fit Defender 300Tdi & Td5 from Landrover this item is over £60.00. (Mat is shown fitted over a tunnel for clarity, tunnel NOT included).
CLICK HERE FOR A LARGER IMAGE
|
|
LIMITED STOCKS!! Two piece, stainless steel system to suit Discovery 1 300 Tdi. Replaces the system from the down pipe backwards with a durable, attractive stainless steel system. Excellent value for money at this price, snap them up while you can!
CLICK HERE FOR LARGER IMAGE
|
|
A 1:18 scale die cast metal model Landrover Freelander 1 by Grande Marques. The doors and bonnet of this modle open to reveal a great level of detail. A fantastic addition to any collection.
CLICK HERE FOR A LARGER IMAGE
|
|
Manufactured by Gradnes Marques. Opening doors and bonnet. Both the interior and the exterior of this model show extraordinary detail. A great collectors item.
CLICK HERE FOR LARGER IMAGE
|
|
